Body

• Sheet steel 1.2mm/1.5 mm (600x600x210 and above)
• Folded and seam welded
• To allow for air circulation around the rear and for wall fixing, 4 off 20
• 4 mm diameter x 2 mm deep depressions are pressed out with an 8.5 mm diameter hole

Door

• Sheet steel 1.2 mm
• 1.5 mm (600x500x210 and above)
• 2.0 mm (1000x800x300 and above)
• Surface mounted with 130° opening
• Concealed removable hinge with captive pin
• Hinges can be mounted to allow left or right hand opening
• From size 500x500x210 and larger there are two removable mounting profiles in the door
• Sealing is ensured by an extruded one piece polyurethane gasket

Mounting plate

• 2.5 mm galvanised steel
• The plate is marked at 10 mm intervals for easy horizontal positioning of equipment on the mounting plate
• On the top and bottom are holes to facilitate cable fixing
• Fixed onto M8 press welded studs to the rear of the enclosure
• All sides from 1000 mm and above are strengthened by folded edges
• By using the mounting plate guides, the mounting plate position can be adjusted to any depth

Lock

• Customised lock with double grip for easy opening of the door, 3 mm double bit lock with pin and 90° movement
• 1000 and 1200 mm high enclosures have espagnolet, three point locking
• Other inserts are available

Gland plate opening

• Situated at the far rear of the enclosure to accommodate easy cabling onto the mounting plate

Finish

• Body, door and gland plate: grey RAL 7035 structure polyester powder paint

Download Product Catalogue

• 11 different basic enclosures ( from 65x65mm up to 361x254mm) with up to 5 different cover depths.
• Material: made of polystyrene or glass-fibre reinforced polycarbonate.
• Colour: Grey RAL 7035
• High protection degree, IP66-IK07 for polystyrene, and IP66-IK08 for polycarbonate, by means of injected polyurethane seal.
• Polycarbonate boxes are available with smooth side walls (only one entry) or with several metric knock-outs.
• Polystyrene boxes are available with smooth side walls or with several metric knock-outs.
• Opaque grey or transparent covers.
• Designed for surface mounting.
• Combinations of heights and widths.
• Polystyrene boxes are suitable for use in temperatures up to +70°C, polycarbonate boxes are suitable for use in temperatures up to +120°C.
• Total insulation
• High resistance to chemical and aggressive influences.
• Non-corrosive and maintenance-free.
• Halogen-free (PC) or low-halogen (PS) materials.
• Self-extinguishing (UL94-V2).
• Rated insulation voltage Ui = 1000V

Why Multibox

• Customer-specific developments
• Flexible customised entry possibilities
• modular tools
• modification for low quantities
• Different colours available
• Complete assembled and equipped units

Download Insulated Boxes Catalogue