• Three basic mounting configurations, plug-in fast-on or solder mounting, printed circuit board solder mounting and plug-in 8 , 11 or 14 pin relays.
• Contact combinations from 2 to 4 pole changeover.
• Control circuit voltages AC or DC from 6V to 240V.
• Relays are 6,10 and 12 amp rated.
  Status indication either mechanical or LED or both.
• Sockets for 35mm DIN rail mounting.

• IEC 947 standards compliant
• 3-pole: 2.2kW to 5.5kW - 380/415V - AC3, 6 to 12 A - AC3
• Control circuit :AC, DC, low coil consumption (1.2 and 2W/24V). DC operating limits 0.8...1.1 Us and operating limits 0.7...1.3 Us
• 4-pole: 20A AC1,Control circuit : AC, DC
• Available in 3 different contact configurations.
• Terminal protection degree IP2X
• Terminations: Screw, Ring Terminal, Fast-on - 2 x 2.8 mm (on request 1 x 6.3 mm) and Printed Circuit Board configurations.

Terminals:

• Numbered according to EN standards
• Posidrive terminal screws
• Mounting in line.
• Terminal numbering in accordance with EN50012 and EN50005.

Coils:

• Protected against overheating
• Easily interchangeable
• Spare parts
• Wide Tolerance 0.7 - 1.3 x Us

Mounting:

• 35 mm DIN-rail mounting or screw fixing

Accessories:

• Front mounting auxiliary contact blocks.
• Two and Four pole contact configurations.
• Protection degree IP20.
• Side mounting auxiliary contact blocks.
• Single circuit contact blocks.
• Common for AC or DC contactors.
• Possible to mount up to 4 blocks in tandem.
• Delay ON Electronic timer for front, side or DIN mounting timing range 0.5 - 60 sec and 0.2 - 24 sec.

For more info about GE Motor Control please call our sales team.